|
| |
TM 5-2420-222-34
3-8.
CRANKSHAFT MAINTENANCE (Con’t).
CAUTION
Main bearings and main bearing caps must be Installed In same location from
which they are removed. Failure to do so may damage parts.
NOTE
Engine has five main bearing caps. Removal of all five is the same. One Is shown.
Repeat steps 11 through 13 for remaining four main bearing caps.
11.
Using center punch and hammer, match-mark main bearing cap (8) to engine block (3) to ensure proper
installation.
12.
Remove two screws (2) and washers (1) from main bearing cap (8) and engine block (3).
TA701249
3-46
|
