|
| |
TM 5-2420-222-34
3-6.
CYLINDER HEAD MAINTENANCE (Con’t).
2.
Coat threads of capscrews (2) with engine oil. Install 18 washers (1) and capscrews in cylinder head (3) and
engine block (6). Torque ca screws in sequence shown to 95 lb.-ft. (129 N•m).
FOLLOW-ON TASKS:
•
Install fuel injection nozzles (see TM 5-2420-222-20).
•
Install exhaust manifold (see TM 5-2420-222-20).
•
Install air inlet housing (see TM 5-2420-222-20).
•
Install engine starting aid fluid injection tube and fittings (see TM 5-2420-222-20).
•
Install rocker arm, shaft, and pushrods (see paragraph 3-13).
•
Install rocker arm cover (see TM 5-2420-222-20).
TA701246
3-40
|
