|
| |
TM 5-2420-222-34
15-3.
BACKHOE SWING FRAME MAINTENANCE (CON’T).
6.
Using ball-peen hammer and brass drift, install sleeve
bushing (13) in swing frame (6).
7.
Install pin (12) and sleeve spacer (9) in swing frame (6)
and main frame (2).
8.
Install two washers (10), screw (11), and nut (14) in
swing frame (6) and main frame (2).
9.
Using ball-peen hammer and brass drift, install sleeve
bushing (8) in swing frame (6).
10.
Install pin (7) and sleeve spacer (3) in swing frame (6)
and main frame (2).
11.
Install two washers (4), screw (1), and nut (5) in swing
frame (6) and main frame (2).
12.
Remove lifting device from swing frame (6).
FOLLOW-ON TASKS:
•
Install manifold block (see TM 5-2420-222-20).
•
Install backhoe boom (see paragraph 15-2).
TA701645
15-16
|
