|
| |
TM 5-2420-222-34
14-25.
LOADER BOOM CYLINDER ASSEMBLIES REPAIR (Con’t)
9.
Coat new bearing ring (4) with hydraulic fluid.
10.
Install bearing ring (4) in place on piston (5). Tap piston with assembled parts in place on piston rod (10).
11.
Install new self-locking nut (3) on piston rod (10) and remove piston rod from vise.
12.
Place cylinder (2) in vise with caps. With the aid of an assistant, install piston rod (10) with assembled parts in
cylinder.
13.
Using spanner wrench, tighten nut (12) In cylinder (2).
14.
Install lubrication fittings (9 and 21) in piston rod (10) and cylinder (2). Remove cylinder from vise.
FOLLOW-ON TASKS:
•
Install loader boom cylinder assembly (see TM 5-2420-222-20).
TA701631
14-123/(14-124 Blank)
|
