|
| |
TM 5-2420-222-34
14-24.
LOADER BUCKET CYLINDER ASSEMBLIES REPAIR (Con’t).
8.
Place piston rod (9) in vise with caps. Tap piston (7) with assembled parts in place on piston rod.
9.
Coat new wear ring (3) with hydraulic fluid.
10.
Install wear ring (3) in place on piston (4). Tap piston with assembled parts in place on piston rod (9).
11.
Install new self-locking nut (2) on piston rod (9) and remove piston rod from vise.
12.
Place cylinder (1) in vise with caps. With the aid of an assistant, install piston rod (9) with assembled parts in
cylinder.
13.
Using spanner wrench, tighten nut (10) In cylinder (1).
14.
Install lubrication fitting (20) in cylinder (1). Remove cylinder from vise.
FOLLOW-ON TASKS:
•
Install loader bucket cylinder assembly (see TM 5-2420-222-20).
TA701629
14-119
|
