|
| |
TM5-2420-222-34
14-8.
AW CONTROL VALVE ASSEMBLY REPAIR (Con’t).
10.
Install two seats (3) and new preformed packings (4) on directional control slide (5).
11.
Install directional control slide (5) with assembled parts in valve body (9) while holding seats (3) in place.
12.
Install seal retaining plate (2) and two screws (1) in valve body (9).
13.
Install seal retaining plate (19) on valve body (9).
14.
Install two spring seats (17) and spring (18) in place on directional control slide (5) in valve body (9).
15.
Hold directional control slide (5) to prevent turning and install shouldered screw (16).
16.
Install valve cap (14) on valve body (9) and secure with two capscrews (15).
FOLLOW-ON TASKS:
NOTE
Perform the following only for loader backhoes with serial numbers 235786-235999.
•
Install jaw control valve assembly (see TM 5-2420-222-20).
NOTE
Perform the following only for loader backhoes with serial numbers 319995-342573.
•
Install jaw direct linear valve (see TM 5-2420-222-20).
TA701574
14-44
|
