|
| |
TM 5-2420-222-34
14-7.
HYDRAULIC PUMP STROKE CONTROL VALVE SOLENOID REPLACEMENT.
This Task Covers:
a.
Removal
b.
Cleaning and Inspection
c.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Hydraulic system pressure released (see TM 5-24
•
Rags (Item 28, Appendix B)
222-20).
•
Trichlorotrifluoroethane (Item 40, Appendix B)
•
Battery ground cable disconnected (see TM 5-24
•
Two preformed packings
222-20).
•
Left grille removed (see TM 5-2420-222-20).
General Safety Instructions:
Tools/Test Equipment:
•
Trichlorotrifluoroethane cleaning compound is highly
•
General mechanic's tool kit
flammable and toxic, and must not be used near open
•
Field automotive shop set
flame. Use only in a well-ventilated area.
a.
REMOVAL
1.
Disconnect wire lead (4) from connector (5).
2.
Remove solenoid (3) from hydraulic pump stroke control valve (1).
3.
Remove two preformed packings (2) from solenoid (3). Discard preformed packings.
TA701571
14-38
|
