|
| |
TM 5-2420-222-34
13-5.
COWL SUPPORT MAINTENANCE (Con’t).
a.
REMOVAL
NOTE
Some loader backhoes may not have hanger and retaining strap. If parts are not
present, skip steps 1 and 2.
1.
Remove two capscrews (6), washers (5), lockwashers (2), nuts (1), and retaining strap (4) from hanger (3). Discard
lockwashers.
2.
Remove two capscrews (19), washers (18), lockwashers (8), nuts (9), and hanger (3) from steering column (16) and
cowl support (7). Discard lockwashers.
3.
Remove two nuts (13), lockwashers (14), washers (15), and U-bolt (17) from steering column (16) and angle bracket
(11). Discard lockwashers.
4.
Remove two screws (12), lockwashers (10), nuts (20), and angle bracket (11) from cowl support (7). Discard
lockwashers.
5.
Remove cotter pin (22), washer (23), and speed control shaft rod (24) from shaft (21). Discard cotter pin.
6.
Remove two screws (28), lockwashers (27), and sleeve spacers (26) from cowl support (7) and reverser housing (25).
Discard lockwashers.
TA701525
13-26
|
