|
| |
TM 5-2420-222-34
13-4.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY REAR MOUNTS MAINTENANCE (Con’t).
6.
Install two screws (8), lower front mounts (11), washers (12), new lockwashers (13), and nuts (14) in canopy or ROPS
(7) and two special brackets (10).
7.
Position front crossmember (15) in place on canopy or ROPS (7) and secure with four capscrews (18), washers (17),
and new lockwashers (16).
8.
Remove lifting device from canopy or ROPS (7).
TA701523
13-23
|
