|
| |
TM5-2420-222-34
13-1.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY FRONT MOUNTS AND
BRACKETS MAINTENANCE (Con’t).
NOTE
If Installing right special bracket and front mounts, skip step 6.
6.
Install screw (1), two clamps (12), spacer (11), new lockwasher (10), and nut (9) on two hydraulic lines (2) and
special bracket weldment (8).
7.
Position front crossmember (3) in place on canopy or ROPS (4) and secure with four screws (7), washers (6), and
new lockwashers (5).
8.
Remove lifting device from canopy of ROPS (4).
FOLLOW-ON TASKS:
NOTE
Perform the following only if left front mounts were removed.
•
Install left platform (see TM 5-2420-222-20).
NOTE
Perform the following only if right front mounts were removed.
•
Install accumulator (see TM 5-2420-222-20).
•
Install right platform (see TM 5-2420-222-20).
NOTE
Perform the following if right and left front mounts were removed .
•
Install left outer platform (see TM 5-2420-222-20).
•
Install right inner platform (see TM 5-2420-222-20).
13-6
|
