|
| |
TM5-2420-222-34
13-1.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY FRONT MOUNTS AND BRACKETS MAINTENANCE
(Con’t).
4
Remove nut (22), lockwasher (21), lower front mount (19), washer (20), and screw (13) from canopy or ROPS (4)
and special bracket (16). Discard lockwasher.
NOTE
Only loader backhoes with serial numbers 319995-342573 have lockwashers with
screws attaching special bracket to reverser housing.
5.
Remove screw (23), lockwasher (24), and washer (25), if present, from special bracket (16) and reverser housing
(29). Discard lockwasher.
6.
Remove two screws (26), lockwashers (27), and washers (28), if present, upper front mount (14), and special
bracket (16) with assembled parts from reverser housing (29) and canopy or ROPS (4). Discard lockwashers.
b.
DISASSEMBLY
1.
Remove upper front mount (14) from retaining plate (15).
2.
Remove two capscrews (18), lockwashers (17), and retaining plate (15) from special bracket (16). Discard
lockwashers.
TA701509
13-3
|
