|
| |
TM5-2420-222-34
CHAPTER 13
BODY AND ACCESSORIES MAINTENANCE
Paragraph
Page
Number
Paragraph Title
Number
13-1
Roll-over Protective Structure or Canopy Front Mounts and
Brackets Maintenance...................................................................................................
13-1
13-2
Canopy Protective Roof Maintenance (Serial Numbers 235786-235999) .....................
13-7
13-3
Canopy Protective Roof Maintenance (Serial Numbers 319995-342573) .....................
13-10
13-4
Roll-over Protective Structure or Canopy Rear Mounts Maintenance............................
13-13
13-5
Cowl Support Maintenance ............................................................................................
13-25
13-6
Fenders and Supports Maintenance ..............................................................................
13-32
13-1.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY FRONT MOUNTS AND BRACKETS MAINTENANCE.
This Task Covers:
a.
Removal
d.
Repair
b.
Disassembly
e.
Assembly
c.
Cleaning and Inspection
f.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
•
Right inner platform removed (see TM 5-2420-
•
General mechanic's tool kit
222-20).
•
Field automotive shop set
•
Left outer platform removed (see TM 5-2420- 222-20).
Materials/Parts:
•
Detergent (Item 13, Appendix B)
NOTE
•
Rags (Item 28, Appendix B)
Perform the following only when removing
•
Dry cleaning solvent (Item 31,
right front mounts.
appendix B)
•
Accumulator removed (see TM 5-2420-222-20)
•
Eleven lockwashers
•
Right platform removed (see TM 5-2420- 222-20).
Personnel Required: Two
NOTE
Perform the following only when removing left front mounts. General Safety Instructions:
•
Left platform removed (see TM 5-2420-222-20).
•
Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
area.
13-1
|
