|
| |
TM5-2420-222-34
12-1.
FRAME ASSEMBLY FRONT SUPPORT MAINTENANCE (Con’t).
NOTE
Rubber sets should seat in channels of half couplers with no metal-to-metal contact.
34.
Position two half couplers (15 and 18) on four rubber sets (13). Install and alternately tighten two screws (19) in
coupler halves. Torque screws to 23-27 lb.-ft. (31-37 N•m).
35.
Install and alternately tighten two special nuts (16) on screws (19). Torque special nuts to 23-27 lb.-ft. (31-37
N•m).
36.
Alternately tighten two screws (14) in hydraulic pump drive shaft (17). Torque screws to 23-27 lb.-ft. (32-37 N•m).
TA701505
SERIAL NUMBERS 235786-235999
12-24
|
