|
| |
TM 5-2420-222-34
11-2.
STEERING CYLINDER ASSEMBLIES MAINTENANCE (Con’t).
20.
If removed, install two lubrication fittings (8) in actuating cylinder (16) and piston rod (17).
21.
Remove actuating cylinder (16) from vise.
f.
INSTALLATION
1.
Install actuating cylinder (16) with assembled parts in place on front axle (2) and steering arm (20).
2.
Drive pin (3) in actuating cylinder (16) and front axle (2). Secure pin with new cotter pin (18).
3.
Drive pin (1) in steering arm (20) and piston rod (17). Secure pin with new cotter pin (19).
NOTE
Steps 4 and 5 apply only to left steering cylinder on loader backhoes with serial
numbers 235786-235999.
4.
Install tee (11) and new preformed packing (9) in actuating cylinder (16).
TA701484
11-15
|
