|
| |
TM 5-2420-222-34
11-2.
STEERING CYLINDER ASSEMBLIES MAINTENANCE (Con’t).
4.
Remove elbow (6) and preformed packing (5) from actuating cylinder (16). Discard preformed packing.
NOTE
Steps 5 and 6 apply only to left steering cylinder on loader backhoes with serial
numbers 235786-235999.
5.
Remove two hoses (10 and 12) from tee (11).
6.
Remove tee (11) and preformed packing (9) from actuating cylinder (16). Discard preformed packing.
7.
Remove cotter pin (19) from pin (1). Discard cotter pin.
8.
Drive pin (1) out of steering arm (20) and piston rod (17).
9.
Remove cotter pin (18) from pin (3). Discard cotter pin.
10.
Drive pin (3) out of front axle (2) and actuating cylinder (16).
11.
Remove actuating cylinder (16) with assembled parts from front axle (2) and steering arm (20).
12.
With the aid of an assistant, work piston rod (17) in and out of actuating cylinder (16) and drain oil.
b.
DISASSEMBLY
1.
If damaged, remove two lubrication fittings (8) from actuating
cylinder (16) and piston rod (17).
SERIAL NUMBERS 319995-342573
TA701479
11-9
|
