| |
TM 5-2420-222-34
11-1.
STEERING COLUMN AND VALVE SUPPORT MAINTENANCE (Cont).
f.
INSTALLATION
1.
Position angle bracket (19) in place on cowl support (9) and secure with two capscrews (15), new lockwashers
2.
Position steering column housing (21) with assembled parts in place on reverser housing (28).
3.
Install four capscrews (25) and new lockwashers (26) in steering valve support (27) and reverser housing (28).
4.
Install U-bolt (20), two washers (18), new lockwashers (17), and nuts (16) on steering column housing (21) and
angle bracket (19).
NOTE
Some loader backhoes do not have rear bracket and clamp. If parts are not present,
skip step 5.
5.
Install retaining strap (22), two capscrews (23), washers (24), new lockwashers (11), and nuts (10) in hanger (12)
on cowl support (9).
TA701476
11-5
|