|
| |
TM 5-2420-222-34
10-2.
PARKING BRAKE LINKAGE MAINTENANCE (Con’t).
NOTE
When Installing spring pin in shouldered shaft, ensure that top end of spring pin Is
flush with top side of shouldered shaft. If not, spring pin will catch on transmission
top cover preventing parking brake from working.
12.
Drive new spring pin (5) in shouldered shaft (6) until flush with top side of shouldered shaft.
13.
Install elbow (8) and hose (7) on tee (9).
14.
Aline brake rod 92) with support arm (4) and install straight pin (3) and new cotter pin (1).
NOTE
Loader backhoes with serial numbers 235786-235999 have a canopy. Loader
backhoes with serial numbers 319995-342573 have a roll-over protective structures
(ROPS).
15.
Install roll-over protective structure or canopy right rear support and mounts (see paragraph 13-4).
16.
Install backhoe main frame (see paragraph 15-4).
FOLLOW-ON TASKS:
•
Install parking brake band and lining (see paragraph 10-1).
TA701464
10-12
|
