|
| |
TM 5-2420-222-34
3-1.
ENGINE ASSEMBLY COMPRESSION TEST (Con’t).
WARNING
Although battery ground cable must be connected to test electrical circuit voltage,
disconnect battery ground cable before doing resistance tests or replacing parts. This
will prevent injury from electrical shock and possible damage to equipment.
9.
Disconnect battery ground cable from battery (see TM 5-2420-222-20).
10.
Remove electrical tape from wiring harness terminal (4). Position wiring harness terminal in place on fuel injection
pump shutoff solenoid terminal (5) and install new self-locking nut (3).
FOLLOW-ON TASKS:
•
Install fuel injection nozzles (see TM 5-2420-222-20).
TA701219
3-4
|
