|
| |
TM 5-2420-222-34
9-3.
REAR AXLE HOUSING, SHAFTS, SEALS, BEARINGS, AND PLANETARY PINION CARRIER MAINTENANCE
(Con’t).
5.
Using lifting device, raise and aline rear axle housing (1) with final drive shaft (7); aline three straight pins (44) with
holes in transmission (9).
6.
Install rear axle housing (1) with assembled parts and new gasket (6) on transmission (9). Turn axle shaft (15) as
required to mesh final drive shaft (7) in rear axle housing.
7.
Install twelve screws (10) in rear axle housing (1) and transmission (9). Alternately torque screws to 85 lb.-ft. (115
N•m).
TA701452
9-26
|
