|
| |
TM 5-2420-222-34
9-2.
WHEEL SPINDLES AND STEERING ARMS MAINTENANCE (Con’t).
9.
With the aid of an assistant, remove wheel spindle (13) with two assembled thrust washer bearings (16) from front
axle (14) and two bushings (17).
10.
Remove two assembled thrust washer bearings (16) from wheel spindle (13).
CAUTION
Do not remove spring pin unless damaged. Removal may damage parts.
11.
Remove spring pin (15) from wheel spindle (13).
b.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point is 100°F-138°F (38°C-59C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean all metal parts with dry cleaning solvent and rags. Dry thoroughly with clean, dry rags.
TA701437
9-6
|
