|
| |
TM 5-2420-222-34
9-1.
FRONT AXLE ASSEMBLY MAINTENANCE (Con’t).
c.
REPAIR
Restore damaged front axle (4) threads using screw threading set.
d.
ASSEMBLY
NOTE
Perform steps 1 through 3 only If bushings and spring pins were removed.
1.
Position four bushings (2) in place on front axle (4) and tap in using brass drift and hammer.
2.
Position bushing (3) in place on front axle (4). Using brass drift and hammer, drive bushing in front axle until flush
with bottom of chamfer and grease fitting holes aline.
3.
Install two spring pins (5) in front axle (4).
4.
If removed, install two grease fittings (1) in front axle (4).
5.
Install wheel spindles and steering arms (see paragraph 9-2).
6.
Install tie-rods (see TM 5-2420-222-20).
7.
Install steering cylinder assemblies (see paragraph 11-2).
FOLLOW-ON TASKS:
•
Install frame assembly front support (see paragraph 12-1).
•
Install counterweight (see TM 5-2420-222-20).
9-3
|
