|
| |
TM 5-2420-222-34
8-21.
REVERSER OIL LINES REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Reverser housing removed (see paragraph 8-16)
• Eighteen preformed packings
Tools/Test Equipment:
•
General mechanic's tool kit
a.
REMOVAL
1.
Remove front clutch pressure tube (4) from retaining plate (10) and lubrication tube (2). Remove and discard two
preformed packings (3).
2.
Remove lubrication tube (2) from front clutch. Remove and discard two preformed packings (1).
3.
Remove reverse clutch pressure tube (13) from retaining plate (10) and reverse clutch. Remove and discard two
preformed packings (5).
4.
Remove transmission lubrication tube (8) from retaining plate (10) and transmission. Remove and discard two
preformed packings (9).
5.
Remove filter tube (6) from retaining plate (10). Remove and discard two preformed packings (7).
6.
Remove rear clutch lubrication tube (12) from retaining plate (10) and rear clutch. Remove and discard two
preformed packings (11).
TA701431
8-101
|
