|
| |
TM 5-2420-222-34
8-20.
REVERSER CLUTCH CONTROL VALVE ASSEMBLY MAINTENANCE (Con’t).
5.
Install new gasket (52), retaining plate (51), and new gasket (50) on control cover (53) with retaining plate (49),
new lockwasher (48), and screw (47).
6.
Install control cover (53) on valve body (1) with five washers (54) and screws (55).
7.
Install new preformed packing (57) on plug (56) and install in valve body (1).
8.
Install two new preformed packings (46) on drain plugs (45) and install in valve body (1).
9.
Install new preformed packing (42) on drain plug
(41) and install in pump cover (24).
10.
Install new preformed packing (43) on screw (44)
and install in pump cover (24).
TA701426
8-96
|
