|
| |
TM 5-2420-222-34
8-19.
TRANSMISSION OIL PUMP MAINTENANCE (Con’t).
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only In a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point Is 100F-138°F (38°C-59C). If you
become dizzy while using cleaning solvent, Immediately get fresh air and medical
help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean transmission oil pump, gears, and powershaft drive shaft with dry cleaning solvent and rags. Dry thoroughly
with clean, dry rags.
2.
Inspect transmission oil pump, gears, and powershaft drive shaft for cracks, breaks, bends, or damaged gear
teeth.
3.
Inspect bearing (see TM 9-214).
d.
ASSEMBLY
1.
If removed, install pin (4) in transmission oil pump (3).
2.
Install bearing (9) in transmission oil pump (3).
TA701418
8-86
|
