|
| |
TM 5-2420-222-34
8-17.
REVERSER BRAKE HOUSING REPAIR (Con’t).
10.
Install bearing washer (3) on spur gear (2) in reverser brake housing (1).
11.
Install washer (5) on gearshaft (6) and install gearshaft in spur gear (2).
12.
Install carrier (4) over gearshaft (6).
NOTE
Carrier gears are a matched set.
13.
Apply grease to 69 roller bearings (15) and I on three
gears (16).
14.
Install three gears (16) In carrier (4) with large of gears
facing front of carrier.
15.
Note numbers etched on large end of gears (16) and
numbers etched on gear on gearshaft (6).
16.
Match numbers on gears (16) and gearshaft (6).
Secure gears in carrier (4) with three spacers shafts
(18), six washers (14), and three bearings (13).
TA701410
8-78
|
