| |
TM 5-2420-222-34
8-10.
GEAR SHIFTERS AND SHIFTER SHAFTS MAINTENANCE (Cont)
3.
Place remote control lever (4) and high range shaft (2) in neutral position.
CAUTION
Do not turn shafts and remote control lever during removal. Spring ball bearings
can become lodged in shifter fork drive screw holes causing damage to parts.
4. While assistant supports shifter fork (10), slide low reverse shaft (17) out of transmission (11) and shifter fork, and
catch three ball bearings (15). Remove shifter fork.
5.
Drive spring pin (16) out of transmission (11) and expansion plug (13). Remove spring (14) and expansion plug from
transmission. Discard spring pin.
6.
Place shifter straight shaft (3) into gear to release interlock pin.
7.
While assistant supports shifter fork (7), slide high range shaft (2) out of transmission (11) and shifter fork, and catch
ball bearing (20), spring (19), and expansion plug (18).
8.
Remove spring (1) from high range shaft (2).
9.
Remove shifter fork (7) from collar (12).
TA701387
8-48
|