|
| |
TM 5-2420-222-34
8-5.
TRANSMISSION DRIVE SHAFT MAINTENANCE.
This Task Covers:
a.
Removal
d.
Assembly
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Transmission countershaft and bearing support re-
•
Rags (Item 28, Appendix B)
moved (see paragraph 8-4).
•
Dry cleaning solvent (Item 31, Appendix B)
•
Shim, 0.003 in. thick (as required)
Tools/Test Equipment:
•
Shim, 0.005 in. thick (as required)
•
Shim 0.00 in. thick (as required)
•
General mechanic's tool kit
•
Shim, 0.010 in. thick (as required)
•
Field automotive shop set
General Safety Instructions:
References:
•
Dry cleaning solvent is flammable and must not be
•
TM 9-214
used near open flame. Use only in a well-ventilated
area.
a.
REMOVAL
1.
Using pry bar and dial indicator, move drive shaft (10) and assembled parts back and forth in transmission (7) and
record end play. End play must be 0.004-0.006 in. (0.102-0.152 mm).
TA701372
8-25
|
