|
| |
TM 5-2420-222-34
8-4.
TRANSMISSION COUNTERSHAFT AND BEARING SUPPORT MAINTENANCE (Con’t).
6.
Using retaining ring pliers, install retaining ring (20) in ball bearing (22) and countershaft (8).
7.
Using arbor press, install helical gearshaft (7) in ball bearing (3) until retaining ring groove is visible.
8.
Using retaining ring pliers, install retaining ring (1) in ball bearing (3) and helical gearshaft (7).
f.
INSTALLATION
NOTE
Perform step 1 only if sleeve bushings were removed.
1.
Tap sleeve bushings (14) in place in transmission (12).
2.
Install needle bearing (15) in transmission (12).
3.
Using retaining ring pliers, install retaining ring (16) in needle bearing (15) and transmission (12).
TA701370
8-23
|
