|
| |
TM 5-2420-222-34
8-2.
TRANSMISSION MAINTENANCE (Con’t).
11.
Install six screws (7) and eight new lockwashers (8) in reverser housing (2) and engine assembly (1). Torque
screws (7 and 13) to 130 lb.-ft. (176 Nom).
12.
Position hose (11) on adapter (9) and tighten clamp (10).
13.
Remove wood blocks from under rear of engine assembly (1).
14.
Remove two lifting eyes (3) and lifting device from transmission (6), reverser housing (2), and rear axle housings
(5).
FOLLOW-ON TASKS:
•
Install roll-over protective structure or canopy rear mounts (see paragraph 13-4).
•
Install reverser speed top cover (see paragraph 8-11).
•
Install hydraulic brake cylinder housing (see paragraph 10-4).
•
Install differential lock pedal and linkage (see paragraph 8-8).
•
Install jaw control valve bracket (see TM 5-2420-222-20).
•
Install loader control valve mounting bracket (see TM 5-2420-222-20).
•
Install pressure control valve (see TM 5-2420-222-20).
•
Install right and left service brake lines and fittings (see TM 5-2420-222-20).
•
Install steering valve-to-transmission return oil line (see TM 5-2420-222-20).
•
Install parking brake lever and linkage (see TM 5-2420-222-20).
•
Install left outer platform ramp (see TM 5-2420-222-20).
•
Install left platform (see TM 5-2420-222-20).
•
Install right inner platform ramp (see TM 5-2420-222-20).
•
Install battery tray (see TM 5-2420-222-20).
•
Install center platform (see TM 5-2420-222-20).
•
Install transmission liquid level gage rod (see TM 5-2420-222-10).
8-17
|
