|
| |
TM 5-2420-222-34
7-2.
ENGINE STARTER REPAIR (Con’t).
7.
Remove capscrew (14), lockwasher (12), and nut (13) from drive housing (1) and shifter fork (11) with assembled
parts. Discard lockwasher.
8.
Remove armature (9) with assembled parts from drive housing (1).
9.
Remove shifter fork (11) and solenoid plunger (15) off drive (10) and armature (9).
10.
Remove ring spacer (20) from electrical end bell side of armature (9). Remove drive end thrust collar (25),
retaining ring (24), and ring spacer (23) from drive (10) and armature. Discard retaining ring.
11.
Using arbor press, remove drive (10) from armature (9). Remove flatwasher (22) and ball bearing (21) from
armature.
12.
Position solenoid plunger (15) in vise. Drive spring pin (26) out of solenoid plunger and shifter fork (11). Remove
shifter fork from solenoid plunger. Remove solenoid plunger from vise. Discard spring pin.
7-16
|
