|
| |
TM 5-2420-222-34
7-1.
ENGINE AC GENERATOR REPAIR (Con’t).
CAUTION
Do not twist or bend terminals. Twisting or bending may damage parts. Use long
nose pliers as a heat sink to prevent damage to semiconductor devices while
unsoldering stator lead terminals.
NOTE
Do not remove stator lead terminals unless damaged. All six stator lead terminals
are unsoldered the same way. One terminal and semiconductor device Is shown.
Repeat step 8 for remaining terminals and semiconductor devices.
8.
Using soldering gun and long nose pliers, unsolder stator lead terminal (16) and diode (12) from semiconductor
device (13).
9.
Remove stator (14) from two semiconductor devices (13 and 17).
TA701333
7-3
|
