|
| |
TM 5-2420-222-34
5-2.
FUEL METERING PUMP REPLACEMENT (Con’t).
NOTE
•
Use a drain pan to catch fluid when disconnecting lines and tubes. Clean
up all spills.
•
Tag lines and tubes to ensure proper Installation
4.
Disconnect line (15) from elbow (14).
5.
Disconnect line (13) from connector (12).
NOTE
Four tubes are disconnected the same way. One is shown. Repeat step 6 for
remaining tubes.
6.
Remove screw (19), two washers (18), and tube (17) from hydraulic head (16). Discard washers.
7.
Remove cotter pin (9), rod (11), and washer (10) from throttle lever assembly (8). Discard cotter pin.
8.
Remove locknut (6) and terminal (5) from shutoff solenoid terminal (7). Discard locknut.
TA701325
5-11
|
