|
| |
TM 5-2420-222-34
3-17.
CAMSHAFT MAINTENANCE (Con’t).
f.
INSTALLATION
CAUTION
Do not knock camshaft against engine block bores when Installing camshaft. This
may damage parts.
1.
Lubricate camshaft (3) and assembled parts with engine oil. Slide camshaft with assembled parts into engine
block (2).
2.
Install thrust plate (6) in place around camshaft (3) and on engine block (2). Rotate helical gear (4) until screw
holes in engine block and thrust plate are alined.
3
Install two screws (5) in trust plate (6) and engine block (2). Torque screws to 35 lb.-ft. (47 N•m).
FOLLOW-ON TASKS:
NOTE
Perform the following if removal, disassembly, cleaning and inspection, assembly,
and Installation were required.
•
Install fuel metering pump (see paragraph 5-2).
•
Install tappets (see paragraph 3-14).
•
Install upper idler spur gear (see paragraph 3-15).
NOTE
Perform the following after performing valve lift check.
•
Install rocker arm cover (see TM 5-2420-222-20).
TA701288
3-102
|
