|
| |
TM 5-2420-222-34
3-14.
TAPPET REPLACEMENT (Con’t).
c.
INSTALLATION
CAUTION
•
Tappets must be Installed in same bore from which they were removed.
Improper installation may damage parts.
•
When Installing tappets, ensure that tappets do not fall down through bore. Do
not scratch bore with nonelectrical wire. This may damage parts.
1.
Lubricate eight tappets (2) with engine oil.
2.
Using nonelectrical wire with a 90° bend in end, lower eight tappets (2) in engine block (1) until they rest on
camshaft (3).
FOLLOW-ON TASKS:
•
Install cylinder head (see paragraph 3-6).
TA701276
3-87
|
