|
| |
TM 5-2420-222-34
3-13.
ROCKER ARM, SHAFT, AND PUSHROD MAINTENANCE (Con’t).
a.
REMOVAL
1.
Remove four screws (1) and washers (2) from four rocker arm supports (4) and cylinder head (5).
2.
Remove rocker arm shaft (3) and assembled parts from cylinder head (5).
CAUTION
Pushrods must be installed In same position from which they are removed.
Improper installation may damage parts.
3.
Remove eight pushrods (7) from cylinder head (5) and eight tappets (6).
b.
DISASSEMBLY
1.
Position rocker arm shaft (3) and assembled parts in a vise with soft jaw caps.
2.
Remove two plugs (8) and washers (9) from ends of rocker arm shaft (3).
TA701272
3-82
|
