|
| |
TM 5-2420-222-20-3
JAW DIRECT LINEAR VALVE (SERIAL NUMBERS 319995 THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
39.
Connector (1)
Tee (2) with
a.
Uncap.
assembled parts
b.
Screw on and tighten using two 1 1/4-
inch wrenches.
40.
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
41.
Engine
Start and run at high idle
(TM 5-2420-222-10).
42.
Jaw direct
a.
Operate jaw cylinder
linear valve
(TM 5-2420-222-10) and check for
leaks.
b.
If leaking at any connection, tighten
using 7/8-inch open-end wrench or
1 1/4-inch and 1 1/2-inch open-end
wrenches or 13/16-inch open-end
wrench or two 1 1/4-inch open-end
wrenches, or 1 1/2-inch open-end
wrench.
c.
If leaking does not stop, shut down
(TM 5-2420-222-10) and replace
leaking connection packing, fitting,
or valve as outlined in this task.
d.
If found leaking, repeat steps 40
thru 42.
43.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1258
|
