|
| |
TM 5-2420-222-20-3
JAW DIRECT LINEAR VALVE (SERIAL NUMBERS 319995 THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2. Bulkhead elbow (1)
Hose (2)
a.
Place drain pan underneath to catch
draining fluid.
b.
Using 7/8-inch open-end wrench,
unscrew and take off.
c.
Plug (page 2-137).
d.
Tag (page 2-137).
3. Connector (3)
Swivel tee (4) with
a.
Place drain pan underneath to catch
assembled parts
draining fluid.
b.
Using two 1 1/4-inch open-end
wrenches, unscrew and take off.
c.
Plug (page 2-137).
4. Bulkhead elbow (5)
Hose (6)
a.
Place drain pan underneath to catch
draining fluid.
b.
Using 7/8-inch open-end wrench,
unscrew and take off.
c.
Plug (page 2-137).
d.
Tag (page 2-137).
5. Link (7) and
Cotter pin (9)
a.
Using long roundnose pliers, bend ends
valve (8)
straight and pull out.
b.
Get rid of.
6. Valve (8) and
Two screws (11),
a.
Using 9/16-inch, 318-inch drive deep
bracket (10)
lockwashers (12),
socket, ratchet handle, and 9/16-inch
and nuts (13)
combination box and open-end wrench,
unscrew and take apart.
Top screw will stay in bracket.
b.
Get rid of lockwashers (12).
NOTE
Before removing valve, note relative position of hoses and tees.
7. Link (7) and
Valve (8)
a.
Take off.
bracket (10)
b.
Get rid of drained fluid (page 2-137).
DISASSEMBLY
8. Valve
Jaw control
Remove (page 2-1391).
(direct linear)
valve tubes
and fittings
2-1252
|
