|
| |
TM 5-2420-222-20-3
JAW CONTROL VALVE (SERIAL NUMBERS 235786 THRU 235999 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
31.
Valve
Jaw control
Install (page 2-1391).
(direct linar)
valve tubes
and fittings
INSTALLATION
32.
Link (1) and
Valve (3) with
a.
Slide link (1) into hole in valve
bracket (2)
assembled parts
plunger.
b.
Place in position.
33.
Valve (3) and
Two screws (4),
Screw together and tighten using 9/16-
bracket (2)
new lockwashers (5),
inch, 3/8-inch drive deep socket, ratchet
and nuts (6)
handle, and 9/16-inch combination box
and open-end wrench.
34.
Link (1) and
New cotter pin (7)
a.
Place in position.
valve (3)
b.
Using long roundnose pliers, bend
ends back.
35.
Two bulkhead
Two hoses
a.
Unplug.
elbows (8 and 9)
(10 and 11)
b.
Take off tags.
c.
Screw in and tighten using 7/8-inch
open-end wrench.
36.
Adapter (12)
Hose (13)
a.
Unplug.
b.
Take off tag.
c.
Screw in and tighten using open-end
wrench.
37.
Elbow (14)
Hose (15)
a.
Unplug.
b.
Take off tag.
c.
Screw in and tighten using open-end
wrench.
38.
Loader backhoe
Transmission
Check oil level and add proper amount
and grade (TM 5-2420-222-10).
39.
Engine
Start and run at high idle
(TM 5-2420-222-10).
2-1248
|
