|
| |
TM 5-2420-222-20-3
LOADER BUCKET LEVEL INDICATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
9.
Loader bucket
Pin (6)
a.
Have assistant support link (3).
cylinder piston rod
b.
Using 3-pound head cross-peen
(1), two front guide
hammer and 3/4-inch brass-tipped
links (2 and 3),
driftpin, tap until clear of link (3).
bucket link (4),
and indicator
pivot (5)
10.
Loader bucket
Indicator pivot (5)
Take off.
cylinder piston
and guide link (3)
rod (1) and
pin (6)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors.
Do not use near open flame or excessive heat. The flashpoint is 100F to 138F (38 to 59C). If
you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If
contact with eyes is made, wash your eyes with water and get medical aid immediately.
11.
All parts
a.
Clean in drycleaning solvent.
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts as needed.
12.
All metal parts
Look for cracks, breaks, and abnormal bends.
2-1840
|
