|
| |
TM 5-2420-222-20-3
LOADER BUCKET - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts which cannot be repaired.
10.
All parts
Look for cracks, breaks, and abnormal
bends.
REPAIR
11.
Loader bucket (1)
If cracked or broken, repair by welding (TM 9-237).
INSTALLATION
WARNING
Keep clear of hydraulic components when raised and not supported. Sudden loss of hydraulic
pressure could cause components to drop without warning.
12.
Loader bucket (1)
Loader backhoe
Have assistant move forward into position
(TM 5-2420-222-10).
13.
Lift arm (2)
Have assistant, by operating loader
bucket control lever, aline pin holes.
14.
Loader bucket (1)
Two pins (3)
Using 3-pound head cross-peen hammer
and lift arm (2)
and 3/4-inch brass-tipped driftpin placed
on end without grease fitting hole, drive in.
15.
Loader bucket (1)
Two bucket links (4)
Have assistant, by operating loader
bucket lever, aline pin holes.
16.
Loader bucket (1)
Two pins (5)
Using 3-pound head cross-peen hammer
and two bucket
and 3/4-inch brass-tipped driftpin,
links (4)
drive in.
17.
Four pins (3 and 5)
Eight new rings
Using retaining ring pliers, put on.
(6 and 7)
2-1836
|
