|
| |
TM 5-2420-222-20-3
BACKHOE BUCKET - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
NOTE
Some loader backhoes have linkage pins retained by cotter pins, some have pins retained by
retaining rings. For loader backhoes equipped with retaining rings, skip steps 69 and 70.
69.
Pin (10) and
Cotter pin (12)
a.
Using multiple tongue and groove slip-
special washer (11)
joint pliers, straighten ends.
b.
Using 1/4-inch straight drive-pin punch
and 2-pound head ball-peen hammer,
tap out.
c.
If not replaced during installation,
get rid of.
70.
Pin (10) and
Special washer (11)
Take off.
inner bucket (6)
2-1813
|
