|
| |
TM 5-2420-222-20-3
LOADER BUCKET CYLINDERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
13.
Adapter (1)
Packing (2)
a.
Using pocket knife, take off.
b.
Get rid of.
14.
Loader bucket
Grease fitting (4)
Using 7/16-inch open-end wrench, un-
cylinder (3)
screw and take out.
NOTE
If disassembling left loader bucket cylinder, skip steps 15 and 16.
15.
Loader bucket
Two screws (6)
a.
Using 9/16-inch, 3/8-inch drive socket
cylinder (3) and
and lockwashers (7)
and ratchet handle, unscrew and take
indicator guide
out.
tube (5)
b.
Get rid of lockwashers (7).
16.
Loader bucket
Indicator guide
Take off.
cylinder (3)
tube (5) with
assembled parts
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-137).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and
clothes and don’t breathe vapors. Do not use near open flame or excessive heat.
The flashpoint is 100°F to 138°F (38° to 59°C). If you become dizzy while using
cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes
is made, wash your eyes with water and get medical aid immediately.
17.
Loader bucket
a.
Using clean rags dampened in dryclean-
cylinder (3)
ing solvent, wipe clean.
b.
Using clean, dry rags, wipe dry.
18.
All other metal
a.
Clean in drycleaning solvent.
parts
b.
Using clean, dry rags, wipe dry.
2-1764
|
