|
| |
TM 5-2420-222-20-3
LOADER BUCKET CYLINDERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
WARNING
Some parts are heavy. Be careful when handling them. Lifting equipment is needed
when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds
(45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person
lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy
parts supported only by lifting equipment. Failure to observe this precaution could
cause serious injury or death of personnel.
4.
Loader side
Loader bucket
Using 200-pound capacity lifting equip-
frame (1) and two
cylinder (4)
ment, support.
front guide links
(2 and 3)
5.
Two front guide
Two rings (6)
Using snapring pliers, take off.
links (2 and 3)
and pin (5)
NOTE
Right side loader bucket cylinder has indicator pivot, left side bucket cylinder
has washer.
6.
Two front guide
Pin (5)
Using 3-pound head cross-peen hammer
links (2 and 3),
and 3/4-inch brass-tipped drift pin,
indicator pivot (7)
drive out.
or washer (8),
loader bucket
cylinder (4), and
bucket link (9)
7.
Loader bucket
Two front guide
Take off.
cylinder (4)
links (2 and 3),
indicator pivot (7)
or washer (8), and
bucket link (9)
8.
Loader side
Ring (10) and
Using retaining ring pliers, take off.
frame (1) and
washer (11)
loader bucket
cylinder (4)
2-1762
|
