|
| |
TM 5-2420-222-20-3
BACKHOE BUCKET CYLINDER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
56.
Male nipple (1)
Quick coupler (2)
a.
Take off tag.
with assembled parts
b.
Snap on.
57.
Bucket cylinder (3)
Two spacers (5)
Place into position.
and tube (4)
58.
Bucket cylinder (3)
Clamp (6)
Place into position.
and two spacers (5)
NOTE
Steps 59 and 60 only apply to loader backhoes with Serial Numbers 235786 thru
235999.
59.
Male nipple (7)
Quick coupler (8)
a.
Take off tag.
with assembled parts
b.
Snap on.
60.
Quick coupler (9)
Male nipple (10)
a.
Take off tag.
with assembled parts
b.
Snap on.
61.
Loader
Transmission
Check fluid level and add proper amount
backhoe
and grade (TM 5-2420-222-10).
62.
Engine
Start and run at high idle
(TM 5-2420-222-10).
63.
Oil lines and
a.
Operate dipperstick
fittings dis-
(TM 5-2420-222-10) and check for leaks.
assembled from
b.
If leaking at any connection, tighten
backhoe bucket
using 1 1/16-inch, and two 1-inch
cylinder
open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing or
hoses as outlined in this task.
d.
If found leaking, repeat steps 61
thru 63.
64.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1738
|
