|
| |
TM 5-2420-222-20-3
BACKHOE BUCKET CYLINDER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
NOTE
Some loader backhoes have linkage pins retained by retaining rings, some have
pins retained by cotter pins. For loader backhoes equipped with retaining rings,
skip steps 10 and 11.
10.
Pin (14) and
Two cotter
a.
Using multiple tongue and groove
two special
pins (16)
slip-joint pliers, straighten ends.
washers (15)
b.
Using 3-pound head cross-peen
hammer and 1/4-inch straight drive-pin
punch, drive out.
c.
Get rid of.
11.
Pin (14) and
Two special
Take off.
two coupler
washers (15)
links (17)
2-1729
|
