|
| |
TM 5-2420-222-20-3
BACKHOE SWING CYLINDERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
54.
Main frame (1)
Two screws (3)
Screw in and tighten using 15/16-inch,
and retainer (2)
1/2-inch drive socket and ratchet handle.
55.
Main frame (1)
Sleeve (4)
Place in position.
56.
Main frame (1)
Pin (6)
Using 2-pound head ball-peen hammer and
swing cylinder (5),
wood block, tap in.
and sleeve (4)
57.
Main frame (1)
Sleeve (7)
Using 2-pound head ball-peen hammer and
and pin (6)
wood block, tap into position.
58.
Sleeve (7)
Retainer (8)
Place into position.
59.
Retainer (8) and
Two screws (9)
Screw in and tighten using 15/16-inch,
main frame (1)
1/2-inch drive socket and ratchet handle.
NOTE
If installing left swing cylinder, skip step 60.
60.
Union
Hose(11)
a.
Takeoff tag.
adapter (10)
b.
Unplug adapter (10).
c.
Screw in and tighten using 7/8-inch
and 1-inch open-end wrenches.
NOTE
If installing right swing cylinder, skip steps 61 thru 66.
61.
Two straight
Two hoses
a.
Take off tags.
adapters (12 and 13)
(14 and 15)
b.
Unplug adapters (12 and 13).
c.
Uncap.
d.
Screw in and tighten using 7/8-inch
and 1-inch open-end wrenches.
62.
Union
Hose (17)
a.
Take off tag.
adapter (16)
b.
Unplug adapter (16).
c.
Uncap.
d.
Screw in and tighten using 11/16-inch
and 7/8-inch open-end wrenches.
2-1720
|
