|
| |
TM 5-2420-222-20-3
HYDRAULIC OIL FILTER
This task covers:
a. Removal (page 2-1698)
d. Inspection/Replacement (page 2-1700)
b. Disassembly (page 2-1700)
e. Assembly (page 2-1701)
c. Cleaning (page 2-1700)
f. Installation (page 2-1702)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Container, 1-gallon
Packing, special screw
Handle, rtchet, 1/2-inch
Packing, cover
Knife, pocket
Rags, wiping (item 21, Appendix C)
Pliers, retaining ring
Solvent, drycleaning (item 28, Appendix C)
Socket, 1/2-inch drive, 3/4-inch
Wrench, torque, 1/2-inch drive
Personnel Required
0 to 150 foot-pound capacity
Two
Materials/Parts
Equipment Condition
Element
Fluid, hydraulic (LO 5-2420-222-12)
Hydraulic pressure released (page 2-1191)
Retainer
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Be careful when draining hot fluids. Wear gloves to protect your hands from hot parts and fluids
or severe burns could result.
1.
Cover (1) and
Special screw (3)
a.
Place 1-gallon container underneath.
oil filter
b.
Hold cover (1) in place.
relief valve (2)
c.
Using 3/4-inch, 1/2-inch drive socket
and ratchet handle, unscrew until free
valve (2).
2.
Oil filter
Cover (1) with
a.
Take off.
relief valve (2)
attached parts
b.
Allow fluid to drain into container.
and special
c.
Get rid of drained fluid (page 2-137).
screw (3)
2-1698
|
