|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE-TO-LOADER BOOM CYLINDER HEAD END OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
8
Left side
Clamp (2),
a
Note relative position of hoses (4, 5,
frame (1)
spacer (3), if
6, and 7) for proper placement during
present, and four
installation.
hoses (4, 5, 6,
b
Take off.
and 7)
9
Long tee (8)
Two hoses
a
Place drain pan underneath.
(4 and 9)
b
Using 7/8-inch and 1-inch open-end
wrenches, unscrew and take out.
c
Cap hose (9) (page 2-137).
d
Tag (page 2-137).
10
Loader backhoe
Hose (4)
Note routing for proper placement during
installation, take out.
11
Loader control
Nut (11)
Using two 1-inch open-end wrenches,
valve (10) and
loosen.
long tee (8)
12
Loader control
Long tee (8)
a
Place drain pan underneath.
valve (10)
with assembled
b
Note relative position for proper
parts
placement during installation.
c
Using 1-inch open-end wrench, un-
screw and take out.
d
Plug control valve (10) (page 2-137).
e
Get rid of drained fluid (page 2-137).
13
Long tee (8)
Packing (12)
a
Using pocket knife, take off.
b
Get rid of.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
14
Hose (4)
a
Using clean rags dampened with solution
of detergent and water, wipe clean.
b
Rinse with clean water.
c
Using clean, dry rags, wipe dry.
2-1682
|
