|
| |
TM 5-2420-222-20-3
HYDRAULIC IMPACTOR VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
5.
Bracket (1) and
Cotter pin (3)
a.
Position bracket (1) with assembled
pin (2)
parts in machinist’s vise.
b.
Using multiple tongue and groove slip-
joint pliers, straighten ends and take
out.
c.
Get rid of.
6.
Bracket (1) and
Pin (2)
Take out.
link (4)
7.
Pedal rod (5)
Cotter pin (6)
a.
Using multiple tongue and groove slip-
and link (4)
joint pliers, straighten ends and take
out.
b.
Get rid of.
8.
Link (4)
Pedal rod (5)
Take out.
9.
Clevis (7) and
Cotter pin (9)
a.
Using multiple tongue and groove slip-
pin (8)
joint pliers, straighten ends and take
out.
b.
Get rid of.
10.
Clevis (7) and
Pin (8)
Take out.
link (4)
11.
Clevis (7) and
Link (4)
a.
Note relative position of holes for
bracket (1)
proper placement during assembly.
b.
Take out.
12.
Elbow and packing
Elbow (11)
a.
Note relative position for proper
assembly (10)
placement during assembly.
b.
Using 1 1/4-inch open-end wrench,
unscrew and take off.
13.
Valve (12) and
Two nuts
Using 1 1/8-inch and 1 1/4-inch open-end
two elbow and
(14 and 15)
wrenches, loosen.
packing assemblies
(10 and 13)
14.
Valve (12)
Two elbow and
a.
Note relative position for proper
packing assemblies
placement during assembly.
(10 and 13)
b.
Using 1 1/8-inch open-end wrench,
unscrew and take off.
2-1230
|
