|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE-TO-HYDRAULIC OIL FILTER RELIEF VALVE OIL LINE
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
NOTE
New hoses for loader backhoes with Serial Numbers 235786 thru 235999 are precut to
proper length. New hoses for loader backhoes with Serial Numbers 319995 thru 342573
are manufactured from bulk items. For more information on manufacturing new hoses,
go to Appendix D.
23.
Connector (1)
Hose (2)
Slide on.
24.
Hose (2)
Clamp (3)
a.
Place in position.
b.
Using 1/4-inch flat-tip screwdriver,
tighten.
25.
Clamp (4)
Place in position.
26.
Oil line (5)
a.
Place in same relative position noted
during removal.
b.
Take off tag.
27.
Clamp (4)
Using 1/4-inch flat-tip screwdriver,
tighten.
28.
Connector (6)
New packing (7)
Place in position.
29.
Loader control
Connector (6)
a.
Unplug valve (8).
valve (8)
b.
Screw in and tighten using 1 1/4-inch
open-end wrench.
30.
Connector (6)
Oil line (5)
a.
Take off tag.
b.
Screw on and tighten using two 1 1/4-
inch open-end wrenches.
31.
Long tee (9)
Nut (10)
Screw on all the way.
32.
New packing (11)
Place in position.
33.
Loader control
Long tee (9) with
a.
Unplug valve (8).
valve (8)
assembled parts
b.
Screw in and tighten to position noted
during removal using 1-inch open-end
wrench.
34.
Loader control
Nut (10)
Using two 1-inch open-end wrenches,
valve (8) and
tighten until seated against valve (8).
long tee (9)
2-1658
|
